Using Bluetooth: Pairing Your Device Using Nfc - iHome iBN26 Instruction Manual

Using Bluetooth: Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section "Pairing Your Device Manually".
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described in the
device's user manual.
2. Place your NFC–enabled device in play mode.
3. Touch the area of your playing NFC device against the
turn on and enter automatic pairing mode, tones will sound and the light will flash blue while the unit
attempts to pair. "iHome iBN26" should appear on your device's menu. If your device asks if you wish
to pair, accept (select "Yes" or similar). Once paired with a device, the blue indicator light will glow
steadily, a confirmation tone will sound and your music will play through the unit.
4. Use the controls on your device to play or pause audio and navigate tracks.
5. Press the – Button or + Button to adjust the volume on the unit. You can also adjust volume on your
device.
6. When done listening, press the
device, too.
NOTE: To disconnect your device, simply touch it again on the
manually, please see the following "Pairing Your Device Manually" section.
Power Button to turn the unit OFF. Remember to turn off your audio
4
Using the
antenna on top of the unit. The unit will
antenna on top of the unit. To pair a device
iBN26