Playing Audio Via Bluetooth - iHome iBN26 Instruction Manual

Pairing with a Different Device
When you power ON the speaker, it will automatically link with the previously paired
Bluetooth device as long as that device is still within range (about 30 feet). To pair with a
different device, follow steps 1& 2 on page 5.

Playing Audio Via Bluetooth

1. Press the Power Button to turn on the unit. The light on front of the unit will flash blue and
ascending tones will sound and the unit will search for a previously paired device. The light
will turn solid blue once a previously paired device is detected. You can then listen to audio
streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
Play Pause Button on the unit to play audio from your linked Bluetooth device.
2. Press the
While audio is playing, press to pause play, and again to resume play.
3. Adjust the volume on the unit by pressing the – Button or + Button. The front panel LED blinks
3x when unit is at maximum volume. You can also adjust volume on your device.
4. When done listening, press the
Note: Audio playing through the unit via Bluetooth will be interrupted whenever the aux in audio
is detected.
Power Button to turn the unit OFF.
6
iBN26
Using the