Pairing Your Bluetooth Device - iHome iBT297 Instruction Manual

Pairing Your Bluetooth Device

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT297. Once your
device is paired, the iBT297 can recognize it and you can play your audio through it.
1. Turn on your Bluetooth device and make it "discoverable" by turning on Bluetooth mode (check
in Options or Settings).
2. Press and release the Mode Button as needed until the "BT" indicator icon
MODE
3. Press and hold the Bluetooth Pairing Button located on the back of the unit
2s
4. "iHome iBT297" should appear in your device's Bluetooth menu. Select "iHome
iHome iBT297
5. When pairing is successful, a voice prompt will announce "CONNECTED", the Bluetooth icon
appear solid, cabinet lights will flash blue two times, indicating the iBT297 is ready to play music. There
should also be an indication on your device. If no device is successfully paired within 3 minutes the
iBT297 will default to previous mode. Once the iBT297 is paired to a device, when powered on and in
Bluetooth mode, it will attempt to autolink when the device is within range (about 33 feet). To reset
Bluetooth, press and hold the Bluetooth Pairing Button for 10 seconds.
appears on the display.
for 2 seconds. The iBT297 cabinet will flash blue and red, a voice prompt will
announce "PAIRING" and the Bluetooth
display, indicating the iBT297 is in pairing mode.
iBT297" to connect it. If prompted for a passcode, enter "1234" on your device.
Using the
icon and "PAIR" will flash on the
12
iBT297
will