Administration > Power Management - Tripp Lite 0SU22090 User Manual

11.4 Administration > Power Management
Where you have a Minicom Serial Remote Power Switch (SRPS), connect it to the
RPS port of the Smart 216.
Configure the Power Management switch as follows:
1. From the menu, click Power Management. The Power Management window
appears, see Figure 16.
2. Select the number of sockets on the power management switch in the Number
of Sockets drop-down menu (SRPS has 8)
3. Click
and Server Name drop-down menus appear.
4. Select the PDU type (default is SRPS).
5. Match the sockets to the servers. For each socket select the server name
connected to it from the drop-down menu.
When there is a double or triple power supply, you need to assign multiple sockets
to the same KVM port.
USER GUIDE
Figure 17 Power Management
. The appropriate number of Managed by Sockets
18