Table of Contents
Advertisement
User
A User can access/control permitted servers. A User has no access to the web
configuration interface.
View only
View only can view the screen of the currently accessed server without keyboard
and mouse control.
11.2.1 Adding a user
To add a user:
1. Click
least 6 characters – letters or numbers, and must not include the user name, even
if other characters are added.
Note! The following "special" characters: &, <, >, " cannot be used for either
the user name or password.
Depending on the security level chosen the user name and password parameters
are different. See section 13 on page 20.
2. Select the permission type from the Permission box.
3. Click
shows the user level (Administrator, User, View Only). The Status column shows
whether the user is blocked or unblocked, explained in section 11.2.3 below.
11.2.2 Deleting a user
To delete a user:
1. Select the user from the list.
2. Click
3. Click
11.2.3 Blocking a user
An alternative to deleting a user is blocking a user. This means that the user's name
and password is stored, but the user is unable to access the system. Check Block to
block a user. Uncheck Block to allow the user access.
USER GUIDE
and type a name and a password. The password must be at
, the user appears in the list of users. The Permission column
.
, the changes are saved.
16
Advertisement
Table of Contents
