Security > Settings - Tripp Lite 0SU22090 User Manual

13. Security > Settings
Configure the security features, such as Account Blocking, Password Policy and
Idle Timeout, as explained below.
From the Security section click Settings, the Security Settings appear, see Figure
19.
The Security Settings fields:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.
Password Policy
For OSD and web configuration access you have the option of a standard or high
security level of password. The table below shows the parameters of the 2 options.
Standard security policy
6 characters or more
Must not include the user name
Check the box to enable the high security password policy. Unchecked, the
standard security policy applies.
OSD password enabled - Access to the OSD can be password enabled or disabled
(default), with the option of a standard or high security level of password as
explained above. Select the checkbox to enable password security. Note! All user
and server security settings depend on the OSD Password being enabled.
Idle Timeout – Select the Timeout inactivity period after which the user is
disconnected from the system. Choose No Timeout to disable Timeout.
USER GUIDE
Figure 19 Security Settings
High security policy
8 characters or more must include at least 1 digit
and 1 upper case letter and 1 "special" character
as follows !@#$%^*()_-+=[]':;?/{}
Must not include the user name
20