M-Audio Axiom Pro User Manual page 55

Axiom Pro User Guide
5. When I press the keys or use any of the MIDI controls (wheel, knob, data buttons, etc.), no data is transmitted
from the MIDI output port on the rear of the Axiom Pro.
This may be the result of the Axiom Pro "MIDI Out" parameter being set to "USB " The MIDI Out port can be configured to
transmit MIDI data from either the Axiom Pro keyboard or from the computer via the USB connection If the MIDI Out mode
is set to USB, the controls on the keyboard will not send any data to the MIDI Out port
See the "Edit Mode > MIDI" section of this User Guide to learn how to toggle the MIDI Out parameter back to transmit MIDI
events generated by the Axiom Pro keyboard
6. Windows XP/Vista users: I connected Axiom Pro to my computer and noticed that a question mark appears in
the Windows Device Manager under Other Devices > M-Audio DFU. Does this indicate that there is a problem
with Axiom Pro?
This behavior is normal and your Axiom Pro will function normally as a class-compliant device (i e , without any drivers)
Installing the Axiom Pro drivers extends the keyboard's functionality in various ways (i e , multi-client support, support for
qualified versions of the Pro Tools M-Powered software, and allowing large SysEx transfers), resolves any "DFU" related
messages that may otherwise appear when drivers are not present, and should also resolve the question mark that appears
next to the product in the Windows Device Manager
7. When playing a virtual instrument loaded in my music software, there is a noticeable delay before I hear any
sound.
This delay is known as latency, and it may be possible to reduce it through the Control Panel of your audio interface Please
refer to your audio interface's User Guide to see if this is possible
8. The Axiom Pro LCD setting has changed and I can no longer see the contents of the screen.
It is possible to bring the LCD to its viewable default settings without having to see the actual contents of the display To do
this, press the Edit Mode button, press "6" on the numerical keypad (Axiom Pro 49/61) or the "6 MNO" D# key
(Axiom Pro 25) to step through the various LCD screen settings
9. I have changed many parameters and would like to go back to the keyboard's default settings.
Axiom Pro 49/61 can be reset to its "factory" settings by holding down the "+" and "-" numerical keypad buttons as the unit is
switched on; Axiom Pro 25 can be reset to its default settings by simultaneously pressing the "+" and "-" Data buttons as the
unit is switched on
Note that all assignments and modified patches will be lost once you perform this action—use this function with caution!
|
51