M-Audio Axiom Pro User Manual page 38

|
Axiom Pro User Guide 34
About the "Endless" Encoders:
The Encoder knobs can function just like the "fixed" knobs found on many synthesizers or MIDI controllers (i.e., fixed knobs
stop rotating and sending MIDI data once you reach the minimum or maximum "ends" of the knob) This is how the Axiom
Pro encoders behave if the "Type" parameter of an encoder is set to "MIDI CC " In this case, when the minimum or maximum
limit is reached, no more data is sent, even if you continue to turn the knob in the same direction (data is only sent again once
the knob is turned in the other direction)
This method means that the knobs send "absolute" MIDI values For example, if the knob is set to value "64, " turning the knob
clockwise will send values "65, 66, 67" and so on If you change presets (or virtual instruments) while you're playing, and the
new preset contains different controller values, you run the risk of having your keyboard's knobs to be "out-of-sync" with what
the MIDI hardware or software is expecting (i e , your physical knob may be in position "64" whereas the new preset/virtual
instrument expects position "0. " ) This may cause your synthesizer settings to jump or "snap" from 0 to 65 when you turn the
encoder—this can be a jarring experience if the parameter is assigned to master volume or filter!
To resolve this common problem, Axiom Pro encoders can also send "relative" MIDI messages This means that when an
Axiom Pro encoder is turned, a message is sent to your software (or connected MIDI device) stating "Take the current value—
whatever it may be—and increase/decrease it by one " This method is preferable to the traditional "absolute" value method
since there is no risk of having your controller knobs and music hardware/software to be "out-of-sync" since Axiom Pro does
not need to know the "expected" position of a knob
Please note that not all hardware/software supports relative MIDI messages If your software does not support relative MIDI
data, you must use absolute MIDI CC messages
Furthermore, applications that do support relative MIDI messages can differ in the way encoder support is implemented
For that reason, Axiom Pro encoders can be configured to send out many different kinds of relative MIDI message types to
ensure support with nearly all popular applications Check your hardware/software's user guide to see what message type is
supported (and to activate the feature, if necessary) Next, take a look at page 4 of the Control Assignment list found earlier
in this guide and select the appropriate "Type" parameter for your Axiom Pro encoder assignments