Table of Contents
Advertisement
Axiom Pro User Guide
Edit Mode > MIDI
This page contains a variety of options relating to MIDI.
Parameter:
Value Range:
Parameter:
Value Range:
The 25 and 49-note versions of Axiom Pro will appear as "Axiom Pro 25" and "Axiom Pro 49" respectively.
12
press 4
SysEx
Off, O, A, A&O, B, B&O, A&B, All
SysEx messages can be transmitted on any combination of Axiom Pro ports:
• A
Axiom Pro 61
USB A
12
Axiom Pro 61
USB B
• B
12
• O
Axiom Pro 61
MIDI Out (External MIDI port)
12
• All
MIDI data is transmitted on all ports
• Off
MIDI data is not transmitted
NOTE: SysEx messages are not MIDI channel specific, instead, a "Device ID"
✓
number is used. If a SysEx message is sent out of a specific Axiom Pro MIDI
port, all connected devices (or software) will receive that data. More info about
SysEx transfers and Device IDs can be found below.
DevID
0-127
This parameter sets the "Device ID" code used when transmitting SysEx messages from Axiom Pro
The default value is 127
The default setting of 127 lets your Axiom Pro respond to all incoming SysEx messages that are
compatible with Axiom Pro controllers However, if you change the Device ID to any other value,
your Axiom Pro will only respond to SysEx messages that contain the same Device ID number This
is useful in situations in which multiple Axiom Pro controllers are connected to your sequencer but
you would like to send SysEx information to a specific controller with a unique Device ID number
|
47
Hide quick links:
Advertisement
Table of Contents
