Table of Contents
Advertisement
Axiom Pro User Guide
Edit Mode > Zones > Data
You can open the Data page for a Zone by entering Edit Mode, selecting the Zone for editing, and then pressing soft-key 4
(Data) This gives access to additional parameters relating to the operation of an individual zone
Parameter:
Value Range:
Parameter:
Value Range:
Parameter:
Value Range: -
press 4
Channel
Global, 1-16
This parameter sets the MIDI output channel of the selected zone The parameter can be set in the
following ways:
• Global
This sets the MIDI channel for the selected zone to the same channel as specified
on the Edit > Global page
• 1-16
This sets the MIDI channel for the selected zone to a channel between 1 and 16
Octave
-4 through +4
This parameter shifts the octave range of the selected keyboard zone either up or down Note
that this parameter works in conjunction with any global shift you may have set using the "Octave"
parameter on the Edit Mode > Global page For example, if you have set the global octave shift to
"+1" and set this parameter to "+2" your selected zone will be shifted upward by three octaves
Transp
12 through +12
This parameter simultaneously shifts all keys in the selected keyboard zone up to 12 semitones in
either direction. Note that this parameter works in conjunction with any global transposition you may
have set using the "Transp " parameter on the Edit Mode > Global page In other words, if you have
set the global transposition shift to "+1" and set this parameter to "+2", your selected zone will be
transposed upward by three semitones
press
soft-key 4,
"DATA"
|
45
Hide quick links:
Advertisement
Table of Contents
