Table of Contents
Advertisement
Axiom Pro User Guide
Parameter:
Value Range:
Parameter:
Value Range:
1 Your DAW (or Virtual
Instrument) is expecting
the slider to be in this
position
When this parameter is set to "off, " the horizontal line representing the "expected" slider position does not appear
Note that the values of the Sliders are remembered each time a patch change occurs When that patch next becomes
active, the values are restored
Drawbar
Off, On
This parameter engages Drawbar Mode When this mode is engaged, the operation of the sliders
is reversed and the maximum MIDI CC value (127) is reached when the slider is at the bottom
whereas the minimum CC value (0) is reached when the slider is pushed to the top This operation
mimics the behavior of typical organs with draw bars
NullMode
Off, On
When this parameter is set to its default "on" position, the MIDI output of the sliders is muted if the
physical slider is out-of-sync with the "expected" position of the slider shown on the LCD display
This prevents associated parameters within your audio applications from potentially "jumping" or
"snapping" to a different MIDI CC value as soon as a slider is moved
Unsynchronized sliders feature a horizontal line across the LCD display's on-screen fader
represents its expected position A square represents the location of the physical slider
the square moves over the line, the physical and on-screen sliders are synchronized
slider begins to output MIDI data once again
An Unsynchronized
Slider
2 This is the actual
position of the
hardware slider on
Axiom Pro
A Synchronized
Slider
3 Once the hardware
slider passes over
the "expected" slider
position, the slider
becomes synchronized
1
2
and that
3
and linked
|
42
that
Once
Hide quick links:
Advertisement
Table of Contents
