Section 4 - Advanced Setup - Lowrance Link-2 User Manual

Section 4 - Advanced setup

How to display and navigate menus
1. Hold down CALL/MENU key for more than 1 second to enter the set up menu.
2. Press CH / to scroll up and down the menu until the cursor is positioned at the
desired items. Press ENTER softkey to select the item.
Make any changes then press ENTER softkey to confirm changes. Otherwise, press
3.
EXIT softkey to ignore.
Press EXIT softkey to go back or exit. Any changes are activated as soon as you
4.
enter/exit the screen.
How to enter Alphanumeric data
Use the CH / key to enter characters.
1. Press to enter and count through numbers and letters, and hold down to select
the desired character.
2. Press to go through letters of the alphabet, and hold down to select the desired
character.
3. Press ENTER to confirm.
The following options are available through MENU:
MENU
• WAYPOINT
• BACKLIGHT
• LAMP
• BUDDY LIST
• CONTRAST
• GPS/DATA
• RADIO SETUP
• DSC SETUP
• ATIS SETUP
(EU only)
• GET BUDDY)
• TRACK LOG
• ERASE TRACK
• RESET
• MANUAL L/L
• SETUP
• ATIS MMSI
(EU only)
• ATIS SELECT
(EU only)
Lowrance - Link-2 Installation and Operation Instructions
• UIC
(non EU)
• CH NAME
• RING VOLUME
• KEY BEEP
• UNITS
• WATCH MODE
(US only)
• WX ALERT
(US only)
• NMEA OUT
• FAV CH SETUP
(non US)
• USER MMSI
• GROUP SETUP
• INDIV REPLY
• DSC SELECT
• LL REPLY
• AUTO SWITCH
• TEST REPLY
• TIMEOUT
21