Section 4 - Advanced Operation - Lowrance LHR-80 Installation And Operation Instructions Manual

Section 4 - Advanced Operation

How to Display and Navigate Menus
1. Hold down CALL / MENU key to enter in menu (US only); or press MENU key to enter
setup mode (EU only).
2. Press CH /
desired items. Press soft-key ENTER to enter into the items.
3. Press soft-key ENTER to confirm changes. Otherwise, press soft-key ESC to ignore.
4. Press soft-key ESC to go back or exit. Any changes are activated as soon as you enter/
exit the screen.
How to Enter Alphanumeric and Alphabet Data
Use the CH / key to enter characters.
1. Press to enter and count through numbers and letters, and hold down to select the
desired character.
2. Press to go through letters of the alphabet, and hold down to select the desired
character.
3. Press ENTER to confirm.
The following options are available through MENU:
MENU
• Waypoint
• Backlight
• Lamp
• Buddy List
(US only)
• Contrast
• GPS/Data
• RADIO SETUP
• DSC Setup
(US only)
• ATIS SETUP
(EU only)
• GET BUDDY
• Track Log
• Erase Track
• RESET
24
to scroll up and down the menu until the cursor is positioned at the
• MANUAL
• SETTING
• ATIS MMSI
(EU only)
• ATIS Select
(EU only)
Lowrance - LHR-80 Installation and Operation Instructions
• UIC (US only)
• CH NAME
• RING VOLUME
• KEY BEEP
• UNITS
• WATCH MODE
(US only)
• WX ALERT
(US only)
• NMEA OUT
• User MMSI
(US only)
• Group MMSI
(US only)
• Idiv Reply
(US only)
• DSC SELECT
(US only)
• LL Reply
(US only)