Manual (Manually Enter Your Position And Utc Time); Settings: Ll Display (Show Or Hide Your Position) - Lowrance Link-2 User Manual

4-6-1 Manual (Manually enter your position and UTC time)

Use the GPS/DATA menu to manually enter your latitude and longitude and the UTC
(time data). The internal GPS must be disabled first in GPS/DATA SETUP. If the internal GPS
receives data, all manual entries will be erased.
LOCAL/DST
▲
BUDDY LIST
CONTRAST
►GPS/DATA ▼
1. Select GPS/DATA and press ENTER.
2. The cursor is at MANUAL, press ENTER. The cursor is then at the first latitude position.
Use the CH /
3.
cursor to the longitude line.
Use the CH / to enter the longitude coordinates one number at a time. Press
4.
ENTER to move cursor to the UTC line.
Use the CH / to enter the UTC one number at a time then press ENTER.
5.
6. After you enter the last number of the UTC, a new screen appears automatically to
show the position and time data. The prefix MAN indicates a manual entry. If you
make a mistake, repeat these steps to correct the data.

4-6-2 Settings: LL display (Show or hide your position)

If your position and time data is being updated automatically, you can use LL DISPLAY to
choose whether to show or hide your position on the screen.
MENU SELECT
▲
BUDDY LIST
CONTRAST
►GPS/DATA ▼
1. Select GPS/DATA, then SETUP.
2. Move the cursor to LL Display and press ENTER.
3. The cursor is at ON (to show your position).
If you want to hide your position, move the cursor to OFF. Press ENTER to confirm your
selection.
GPS/DATA
►MANUAL L/L
SETUP
to enter the latitude one number at a time. Press ENTER to move
GPS/DATA
MANUAL
►SETUP
Lowrance - Link-2 Installation and Operation Instructions
MANUAL L/L
_° _ . _ _ _N
_ _° _ . _ _ _W
MAN _ _:_ _UTC
SETUP
TIME FORMA▲
TIME DISPLY
►LL DISPLY ▼
MANUAL L/L
27 ° 45.210'N
112 ° 36.567'W
12:56 UTC
LL DISPLAY
►ON
OFF
29