Waypoint; Add A New Waypoint - Lowrance Link-2 User Manual

Hold down the CALL/ MENU key for more than 1 second to enter radio set-up mode. This
allows the following functions to be accessed. Scroll down the list and press ENTER. To
exit the Menu or sub-menu modes press 16 or EXIT.

WAYPOINT

Selects the WP List Entry to enter names and LL positions for a WP. Up to
500 WP can be stored.
BACKLIGHT Sets the backlight level: 8 levels.
LAMP Sets the backlight lamp time out.
BUDDY LIST Selects the Buddy List entry to enter names and MMSI's for regularly
called DSC stations. Up to 20 names can be stored.
CONTRAST Selects display contrast setting: 8 levels.
GPS/DATA Select to change the GPS/DATA settings: TIME OFFSET, TIME FORMAT,
TIME DISPLY, LL DOSPLY, COG/SOG, GPS ALERT, GPS ENABLED, MAG VAR.
RADIO SETUP Select to change the radio settings: UIC, CH NAME, RING VOLUME, KEY
BEEP, UNITS, WATCH MODE, WX ALERT, NMEA OUT, FAV CH SETUP.
DSC SETUP Select to change the DSC settings: USER MMSI, GROUP SETUP, INDIV
REPLY, DSC SELECT, LL REPLY, AUTO SWITCH, TEST REPLY, TIMEOUT.
ATIS SETUP Select to change the ATIS settings: ATIS MMSI, ATIS SELECT (EU Only).
GET BUDDY Enable or disable Buddy Data and Auto Function.
TRACK LOG Set the distance interval for recording the track points.
ERASE TRACK Erase track history points.
RESET Reset to factory settings.
4-1 Waypoint
You can store up to 500 waypoints and their LL positions. When your WAYPOINT LIST is
full, you cannot make a new entry until you have deleted an existing one.
• Each waypoint name can have a maximum of 6 alphanumeric characters
• The most recent waypoint name will be displayed at the top of your waypoint list.

4-1-1 Add a new waypoint

WP LIST
►NEW WP
FISH1
22
ENTER WP
_ _ _ _ __ _ _
_° _ . _ _ _' N
_ _° _ . _ _
Lowrance - Link-2 Installation and Operation Instructions
ENTER WP
MOOR 1
_° _ . _ _ _N
_ _° _ . _ _ _W
ENTER WP
MOOR 1
12°32.233'N
132°45.651'W