Auto White Balance Adjustment - Sony DCR-PC10 Service Manual

1-2-17. Auto White Balance Adjustment

Purpose: Adjust the outdoor auto white balance output
data for the correct value.
Adjustment error: Poor white balance at outdoor.
Subject Clear chart
(Color bar standard picture frame)
Filter Color temperature correction filter C14
Measurement Point DDS display on the EVF or monitor
Measuring Instrument TV, or the page A data display on the
adjustment remote commander.
Adjustment Page F
Adjustment Address 34, 35
Specification Value R ratio = 2C40 h to 2CC0 h
B ratio = 6040 h to 60C0 h
Note 1: Make this adjustment after "Auto White Balance
Reference Data Input" is completed.
Note 2: Use the pattern box adjusted correctly.
Adjustment procedure:
Order Page Address
1
2 0 01
3 D 11
4 6 00
5 6 01
6 6 04
7 F 34
8
9 6 04
10 F 35
11
Processing after Adjustments:
Order Page Address
1 6 01
2 6 04
3 6 00
4 D 11
5 0 01
Data
Put on the color temperature correction filter C14 on the lens.
01 Set the data. (Preparation 1)
02 After setting the data, press the PAUSE button.
01 Set the data. (Preparation 2)
3F After setting the data, press the PAUSE button.
04 Set the data.
Change data until the R ratio data on the DDS display becomes the specification value.
Press the PAUSE button.
05 Set the data.
Change data until the B ratio data on the DDS display becomes the specification value.
Press the PAUSE button.
Data
00 After setting the data, press the PAUSE button.
00 Set the data.
00 Set the data. (End 2)
00 After setting the data, press the PAUSE button.
00 Set the data. (End 1)
Procedure
Procedure
5-19