Emergency Memory Address - Sony DCR-PC10 Service Manual

4-2-3.

Emergency Memory Address

Page C Address 30 to 3B
Address
30 EMG code when the first emergency has occurred.
32 Upper : MSW code of the machine status in which
transition has started then the first emergency
occurred.
Lower : MSW code when the first emergency has
occurred.
33 Lower : MSW code of the machine movement target
when the first emergency has occurred.
34 EMG code when the second emergency has occurred.
36 Upper : MSW code of the machine status in which
transition has started then the second
emergency occurred.
Lower : MSW code when the second emergency has
occurred.
37 Lower : MSW code of the machine movement target
when the second emergency has occurred.
38 EMG code when the last emergency has occurred.
3A Upper : MSW code of the machine status in which
transition has started then the last emergency
occurred.
Lower : MSW code when the last emergency has
occurred.
3B Lower : MSW code of the machine movement target
when the last emergency has occurred.
Adjustment procedure:
Order Page Address
1 0 01
30
31
32
33
34
2 C 35
36
37
38
39
3A
3B
3 0 01
Contents
Data
01 Set the data.
00 After setting the data to each address,
press the PAUSE button.
00 Set the data.
When there are no emergency, data 00 will be written in the above
address (30 to 3B). When the first emergency occurs, the data
corresponding to the emergency will be written in the first emergency
address (30 to 33). In the same way, when the second emergency
occurs, the data corresponding to the emergency will be written in
the second emergency address (34 to 37).
The data corresponding to the emergency occurring last will be
written in the last emergency address (38 to 3B).
Therefore the data of addresses (38 to 3B) are renewed each time
an emergency occurs.
Note: Be sure to rewrite the data of addresses 30 to 3B to 00 after
repairs/adjustment.
Procedure
5-75