Key Input Check (A/D Port) - Sony DCR-PC10 Service Manual

Position Code
EJECT A
BL
USE
SOFF C
DS D
LE
STOP
FF
RP B
RVS
NULL
4-2-6.

Key Input Check (A/D Port)

• FK-4850 block and ME-4850 block
Display data
00 to 0F
Address
5C (p) STOP
(KEY AD IN 0) FK, S4
5D (P) PAUSE
(KEY AD IN 1) FK, S8
5E MENU
(KEY AD IN 2) ME, S1
5F EDIT SEARCH (–)
(KEY AD IN 3) ME, S6
60
(KEY AD IN 4)
61
(KEY AD IN 5)
62
LCD PANEL (REVERSE)
(KEY AD IN 6)
Adjustment procedure:
Order Page Address
1 0 00
2 2 04
3 2 5C to 62
Position at which the cassette compartment lock is released, and position at the farthest unload side
mechanically at which the mechanism can move no further in the UNLOAD direction.
BLANK code, at the boundary between codes. The mechanism will not stop at this code during
F
operations. (Excluding LOAD/UNLOAD)
EJECT completion position. When the cassette is ejected, the mechanism will stop at this position.
E Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.
Code during loading. Code output while the LS chassis is moving.
LS operations and guide loading are performed here.
9 Current limiter is turned off.
Stop position in the loading state. The pinch roller separates, the tension regulator returns, and the
5
brake is imposed on both reels.
7 FF position. The tension regulator is half on. This position is not used except for the FF mode.
PB, REC, Cue, Pause, FX2, FWD-SL positions. When the pinch roller is pressed, and the tension
regulator is ON, the mechanism is operating at this position in modes in which normal images are
shown.
3 Reverse running position. REW, REV, RX1, RX2, and RVS-SLOW are performed at this position.
Code not existing in the MD. When errors occur when the loading motor is not driving, this code
0
is memorized.
10 to 47
(0) REW
FK, S5
EXPOSURE
FK, S9
TITLE
ME, S2
EDIT SEARCH (+)
ME, S7
PD-97 board
Data
00 Set the data.
08 Set the data.
The pressed key can be known from the display data of each address.
Contents
48 to 75 76 to A4
(·) PB ()) FF
FK, S6 FK, S7
EXECUTE 5 sec REC
FK, S11 FK, S12
VOLUME + VOLUME –
ME, S3 ME, S4
LCD BRIGHT (–) LCD BRIGHT (+)
ME, S8 ME, S9
IR ON/OFF INFINITY
FK, S2 FK, S14
Procedure
5-77
A5 to E7 E8 to FF
FADER
FK, S3
PUSH REC (r) NORMAL REC
FK, S12 FK, S12
END SEARCH
ME, S5
DISPLAY
ME, S10
A.F./M.F.
FK, S13
PANEL CLOSE LCD PANEL OPEN
(VC-199 board S2300) (VC-199 board S2300)
LCD PANEL (NORMAL)
PD-97 board
FK: FK-4850 block
ME: ME-4850 block