Operating The Self-Cleaning Oven - GE JMP28GR Use And Care Manual

OPERATING THE SELF-CLEANING OVEN

After a Clean Cycle
When the clean cycle is finished, the word "CLEAN"
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
locking temperature, the word "LOCK" goes out and
the door can be opened.
How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day. NOTE: Before beginning, make sure the
oven clock shows the correct time of day.
Quick Reminder—Delay Start for Self-Clean:
1. Prepare the oven for cleaning.
2. Press the CLEAN pad.
3. Press the INCREASE pad.
4. Press the STOP TIME pad.
Time that appears is 3 hours later than the time of
day. Press the INCREASE pad until the Stop Time
you desire appears in the display. The self-clean
cycle will automatically begin 3 hours before the
Stop Time you select.
For example: Let's say it's 7:00 and you want the
oven to begin self-cleaning at 9:00 after you're
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 3 hours
is prefemed.
1: Prepare the oven for cleaning.
Step
Step 2: Close the oven door.
3: Press the CLEAN pad.
Step
CLEAN
Step 4: Press the INCREASE pad.
A
22
(continued)
After a clean cycle, you may notice some white ash in
the oven. Just wipe it up with a damp cloth. If white
spots remain, remove them with a soap-filled steel wool
pad. Be sure to rinse thoroughly with a vinegar and
water mixture. These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, the cycle
may be repeated.
Step 5: Clean Time for heavy soil can be set for
4 hours. If a longer or shorter Clean Time is desired,
press the INCREASE or DECREASE pad until
desired Clean Time is displayed.
Step 6: Press the STOP TIME pad.
STOP
"STOP TIME" flashes. The control
TIME automatically sets Stop Time by
adding the Clean Time to the time of
day. In this example, the time of day is
Adding 3 hours to the time of day
equals 10:00.
7:
in the display. The words "DELAY CLEAN" will also
appear in the display.
The self-clean cycle will automatically begin at 9:00
and finish at 12:00. The word "ON" will appear on
the display at 9:00.
When the oven locks, the word "LOCK" will be
displayed and the door will be locked in position. It
will not be possible to open the oven door until the
temperature drops below the lock temperature.
When the clean cycle is finished, the word "CLEAN"
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below
the locking temperature, the word "LOCK" goes out
and the door can be opened.
Step 8: When the LOCK light is off open the door.