Cable Assembly - Weider Pro 4250 User Manual

19. Attach a Press Arm (30) to the Press Frame (29)
with two M8 x 66mm Bolt (86) and two M8 Nylon
Locknuts (91).
Repeat this step with the other Press Arm
(30).
20. Grease an M10 x 106mm Bolt (72). Attach the
Leg Press Frame (28) to the Left Base (25) with
the Bolt and an M10 Nylon Locknut (90). Do not
overtighten the Locknut; the Leg Press Frame
must be able to pivot easily.
21. Grease an M10 x 75mm Bolt (76). Attach the
Foot Plate (38) to the Leg Press Frame (28) with
the Bolt and an M10 Nylon Locknut (90). Make
sure the decal on the Foot Plate is right side
up. Do not overtighten the Locknut; the Foot
Plate must be able to pivot easily.

Cable Assembly

22. See the CABLE DIAGRAMS on pages 26 and
27 as you assemble the cables and to identify
the cables.
Locate the Press Cable (109). Attach the Cable
to the Leg Press Frame (28) with an M8 x 86mm
Shoulder Bolt (37) and an M8 Nylon Locknut (91).
Do not overtighten the Locknut; the Cable
must be able to pivot easily.
19
86
30
20
21
Grease
76
22
109
12
30
91
29
28
90
25
72
90
38
28
28
91
37