Weider Pro 315 Bench User Manual page 12

PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part from the PART LIST. Note: Some small parts may have been pre-attached. If a
part is not in the parts bag, check to see if it has been pre-attached.
M6 Washer (15)
M10 Nylon Locknut (25)
M10 Washer (30)
M10 x 95mm Bolt (27)
M10 x 90mm Bolt (19)
M10 x 70mm Screw (31)
M10 x 65mm Screw (29)
M6 x 65mm Screw (21)
M10 x 30mm Screw (20)
M4 x 16mm Self-tapping Screw (24)