Part Identification Chart - Weider Club C 240 Bench User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST on page 14. Note: Some small parts may have been
preattached. If a part is not in the parts bag, check to see if it has been preattached.
M10 Nylon Locknut (38)
M6 Washer (35)
M10 Washer (39)
M4 x 16mm Screw (32) M6 x 40mm Screw (31)
M10 x 40mm Bolt (37)
M10 x 20mm Bolt (30)
M10 x 75mm Carriage Bolt (36)
M10 x 75mm Bolt (33)
M10 x 170mm Bolt (34)
M10 x 175mm Bolt (40)
5