DAVIS Vantage Pro Reference Manual page 37

Name
TEMP_OUT_CAL
TEMP_CAL
HUM_IN_CAL
HUM_CAL
DIR_CAL
DEFAULT_BAR_GRAPH
DEFAULT_RAIN_GRAPH
DEFAULT_SPEED_GRAPH
ALARM_START
BAR_RISE_ALARM
BAR_FALL_ALARM
TIME_ALARM
TIME_COMP_ALARM
LOW_TEMP_IN_ALARM
HIGH_TEMP_IN_ALARM
LOW_TEMP_OUT_ALARM 5A
HIGH_TEMP_OUT_ALARM 5B
LOW_TEMP_ALARM
HIGH_TEMP_ALARM
LOW_HUM_IN_ALARM
HIGH_HUM_IN_ALARM
LOW_HUM_ALARM
HIGH_HUM_ALARM
LOW_DEW_ALARM
HIGH_DEW_ALARM
CHILL_ALARM
HEAT_ALARM
THSW_ALARM
SPEED_ALARM
SPEED_10MIN_ALARM
UV_ALARM
LOW_SOIL_ALARM
HIGH_SOIL_ALARM
LOW_LEAF_ALARM
HIGH_LEAF_ALARM
SOLAR_ALARM
RAIN_RATE_ALARM
RAIN_15MIN_ALARM
RAIN_24HR_ALARM
RAIN_STORM_ALARM
ET_DAY_ALARM
Hex Dec Size Description
34 52 1 The setting range is from (-12.8 °F to 12.7 °F) with the
most significant byte as the sign bit.
35 53 15 7 "extra" temperatures, 4 soil temperatures, and 4 leaf
temperatures
44 68 1 The inside humidity calibration value is ranged from 0 to
100%.
45 69 8 The first entry is the currently selected outside humidity
sensor.
4D 77 2 2 byte wind direction calibration allows full 360°
calibration in both directions.
4F 79 1 These values control which time span to use on the
console graph display when Rain, Barometer, or Wind
50 80 1
Speed is shown.
51 81 1
52 82 94 Starting location for the Alarm threshold data. See section
XIII.5 for more details on setting alarm thresholds
52 82 1 3 hour rising bar trend alarm. Units are in Hg * 1000
53 83 1 3 hour falling bar trend alarm. Units are in Hg * 1000
54 84 2 Time alarm. Hours * 100 + minutes
56 86 2 1's compliment of TIME_ALARM to validate alarm entries
58 88 1 Threshold is (data value – 90) °F
59 89 1 Threshold is (data value – 90) °F
90 1 Threshold is (data value – 90) °F
91 1 Threshold is (data value – 90) °F
5C 92 15 7 extra temps, 4 soil temps, 4 leaf temps
6B 107 15 7 extra temps, 4 soil temps, 4 leaf temps
7A 122 1 Low relative humidity alarm in %.
7B 123 1 High relative humidity alarm in %.
7C 124 8 First entry is the current Outside Humidity setting
84 132 8 First entry is the current Outside Humidity setting
8C 140 1 Threshold is (data value – 120) °F
8D 141 1 Threshold is (data value – 120) °F
8E 142 1 Threshold is (data value – 120) °F
8F 143 1 Threshold is (data value – 90) °F
90 144 1 Threshold is (data value – 90) °F
91 145 1 Current Wind Speed alarm. Units are MPH
92 146 1 10 minute average Wind Speed alarm. Units are MPH
93 147 1 Current UV index alarm. Units are (UV Index * 10)
95 149 4 Low soil moisture alarm in centibar. It supports four soil
moisture sensors.
99 153 4 High soil moisture alarm in centibar. It supports four soil
moisture sensors.
9D 157 4 Low leaf wetness alarm with index 0 to 15. 0 is very dry
and 15 is very wet.
A1 161 4 High leaf wetness alarm with index 0 to 15. 0 is very dry
and 15 is very wet.
A5 165 2 Solar energy alarm is set with watts/meter
A7 167 2 Rate rain alarm is set with inches/hour
A9 169 2 15-minute alarm is set with 100
AB 171 2 24-hour alarm is set with 100
AD 173 2 Rain storm alarm is set with 100
AF 175 1 Evapotranspiration alarm is set with 1000
Page 37 of 52
2
.
th
of an inch.
th
of an inch.
th
of an inch.
th
of an inch.