DAVIS Vantage Pro Reference Manual page 23

Field
Low inside hum alarm
High inside hum alarm
Time alarm
Rain Alarms
High rain rate alarm
15 min rain alarm
24 hour rain alarm
Storm total rain alarm
Daily ET alarm
Outside Alarms
Low outside temp alarm
High outside temp alarm
Wind speed alarm
10 min avg speed alarm
Low dewpoint alarm
High dewpoint alarm
High heat alarm
Low wind chill alarm
Outside Alarms, byte 2
High THSW alarm
High solar rad alarm
High UV alarm
UV Dose alarm
UV Dose alarm Enabled
Outside Humidity Alarms 74
Low Humidity alarm
High Humidity alarm
Extra Temp/Hum Alarms 75 - 81 7
Low temp X alarm
High temp X alarm
Low hum X alarm
High hum X alarm
Soil & Leaf Alarms
Low leaf wetness X alarm
High leaf wetness X alarm
Low soil moisture X alarm
High soil moisture X alarm
Low leaf temp X alarm
High leaf temp X alarm
Low soil temp X alarm
High soil temp X alarm
Byte Bit #
4
5
6
71 Currently active rain alarms.
0
1 Flash Flood alarm
2
3
4
72 Currently active outside alarms.
0
1
2
3
4
5
6
7
73
0
1
2
3
4 It is set to 1 when a UV dose alarm threshold has been entered
AND the daily UV dose has been manually cleared.
1 Currently active outside humidity alarms.
2
3
Each byte contains four alarm bits (0 – 3) for a single extra
Temp/Hum station. Bits (4 – 7) are not used and reserved for
future use.
Use the temperature and humidity sensor numbers, as
described in Section XIII.4 to locate which byte contains the
appropriate alarm bits. In particular, the humidity and
temperature alarms for a single station will be found in
different bytes.
0
1
2
3
Currently active soil/leaf alarms.
82 - 85 4
0
1
2
3
4
5
6
7
Page 23 of 52