DAVIS Vantage Pro Reference Manual page 10

All values are recorded since midnight, or since the diagnostics are cleared manually.
Example:
>"RXCHECK"<LF>
<<LF><CR>"OK"<LF><CR>" 21629 15 0 3204 128"<LF><CR>
It shows we received 21,629 packets, missed 15 packets, there were no resynchronizations,
the maximum number of packets received in a row without an error was 3204, and there were
128 CRC errors detected.
"STRMON"
It echos all of the data packets sent by sensor transmitters. The station will respond with an
"OK" message and Davis Talk data packets when received by the console until the
STRMOFF command is given.
For Vantage Pro, each packet contains six bytes and each byte is shown as a two-digit hex
string per line, with a blank line between packets.
For VantagePro 2, each packet contains eight bytes instead of six and it returns the byte
number along with the content for better clarity.
Example (VantagePro):
>"STRMON"<LF>
<<LF><CR>"OK"<LF><CR>
<"F7"<LF><CR>
<"07"<LF><CR>
<"E0"<LF><CR>
<"82"<LF><CR>
<"08"<LF><CR>
<"C4"<LF><CR> . . .
Example (VantagePro2):
>"STRMON"<LF>
<<LF><CR>"OK"<LF><CR>
<"0 = 81"<LF><CR>
<"1 = 0"<LF><CR>
<"2 = 0"<LF><CR>
<"3 = ff"<LF><CR>
<"4 = c5"<LF><CR>
<"5 = 0"<LF><CR>
<"6 = b7"<LF><CR>
<"7 = 42"<LF><CR><LF><CR> . . .
Page 10 of 52