Flow Of Camera Operation Through To Network Operation; User Names And Operating Privileges - Sanyo VDC-DP9575P Manual For Remote Operation

Flow of Camera Operation through to Network Operation

For detailed instructions on individual procedures, refer to the pages shown below.
1 Installing the option board on the camera
Refer to the supplied "INSTALLATION MANUAL" for how to install the option board on the camera and
make connection using LAN cables.
2 Configuring the TCP/IP settings on PC
3 Accessing the camera
Enter your user name and password to access the camera using the Web browser.
4 Viewing live video
After accessing the camera, the live video will be displayed on the main screen.
For an administrative user, also perform the following procedures.
5 Selecting the operating conditions
Using the [MAIN SETTINGS] screen for an administrative user, configure the detailed
settings for administrative operations.
When you access the camera for the first time, be sure to perform the settings on the
[CLOCK SETTINGS] screen (See page 14).
• You can change the settings stored in the camera remotely through the network
connection (See page 21).

■ User names and operating privileges

Two types of user name shown below can access the camera and are authenticated by password during the login
process.
How the user can operate the camera depends on the user name used for accessing the camera.
Used for general access. Operations are limited to monitoring the live video. Any operations on the
guest
configuration screens are not allowed.
Used for administrative access. Any camera operations and configurations can be made through the
admin
Web browser.
If a "guest" user tries to perform an operation not included in his privilege, the authentication dialog appears. In this
dialog, entering the user name and password for an administrative user ("admin") will enable the user to perform all
operations.
The number of users who can access simultaneously
• Up to 16 users can access the camera simultaneously.
• Whatever the number of users accessing the camera simultaneously, only one user can access the camera as an
administrative user ("admin").
Note:
Up to 16 users can access the camera simultaneously, however, depending on the environment of use, image and
voice renewal may become slower as the number of connected users increases.
English 3
Refer to
Page 4
Page 6
Page 8
Page 12