How To Outline And Scan A Document - Brother MFC-J6520DW Web Connect Manual

Outline, Scan, and Copy or Cut
Outlining
Good examples
 Use a red pen or marker with a tip width of 0.04-0.39 in. (1.0-10.0 mm), that is, from an extra-fine tip up to
an extra-thick marker tip.
 Outlined areas with thick red lines are easier to recognize. However, do not use a pen or marker with a tip
wider than indicated above.
 The red outline must not be broken and the line must not cross more than once.
 The outlined area must have a length and width of at least 0.4 in. (1 cm).
 If the paper has a dark background color, the outlined area may be difficult to recognize.

How to outline and scan a document

The areas outlined using a red pen are deleted from the scanned images.
When saving to media, insert the media before scanning.
For MFC-J6920DW
a
Using a red pen, outline the areas of the document that you want to scan.
b
Load your document.
c
Swipe left or right, or press d or c to display the More screen.
d
Press Web.
If information regarding the Internet connection is displayed on the machine's LCD, read the information
and press OK.
e
You will be asked if you want to display this information again in the future.
Press Yes or No.
NOTE
Occasionally, updates or announcements about your machine's feature will be displayed on the LCD.
Read the information, and then press OK.
Bad examples
4
4
4
4
34