Conditions For Using Brother Web Connect; Service Account; Internet Connection; Mfl-Pro Suite Installation - Brother MFC-J6520DW Web Connect Manual

Introduction

Conditions for using Brother Web Connect

Service account

In order to use Brother Web Connect, you must have an account with the desired service. If you do not
already have an account, use a computer to access the service's website and create an account.
You do not need to create an account if you use Brother CreativeCenter.

Internet connection

In order to use Brother Web Connect, your Brother machine must be connected to a network that has access
to the Internet through either a wired or wireless connection. For more information on connecting and
configuring your machine, see the Quick Setup Guide included with your machine.
For network setups that use a proxy server, the machine must also be configured to use a proxy server (see
Proxy server settings on page 4). If you are not sure, check with your network administrator.
NOTE
A proxy server is a computer that serves as an intermediary between computers without a direct Internet
connection, and the Internet.

MFL-Pro Suite installation

The initial installation of Brother Web Connect requires a computer that has access to the Internet and has
Brother MFL-Pro Suite installed. Follow the steps outlined in the Quick Setup Guide to install MFL-Pro Suite
(from the supplied installer CD-ROM) and configure the machine to be able to print over your wired or wireless
network.

Proxy server settings

If the network uses a proxy server, the following proxy server information must be configured on the machine.
If you are not sure, check with your network administrator.
 Proxy server address
 Port number
 User name
 Password
For more information on entering text on the LCD, see the Quick Setup Guide included with your machine.
For MFC-J6920DW
a
Press .
b
Press All Settings.
1
1
1
1
1
1
1
4