Epson EPL-N1200 Reference Manual page 119

Setup Menu
These settings provide the printer with information necessary
for printing. Also see page 6-14.
Interface, Time Out, Standby, Lang, Toner, Toner Count
Clear, Page Count, SelecType Init
Parallel B, Parallel C Menu
These settings control communication between the printer and
the computer when using a parallel interface. Also see page
6-16.
Speed, Bi-D*, Buffer Size
*Available only in Parallel B Menu.
Serial Menu*
These settings control the serial interface settings. These
settings are necessary for correct communication between the
printer and the computer. Also see page 6-16.
Word Length, Baud Rate, Parity, Stop Bit, XOn/XOff, DTR,
Buffer Size
*Available only when the LocalTalk/Serial module is installed and the
SelecType Emulation menu is set to Serial. See Chapter 4, " Options," for
more information.
L/T*, AUX** Menu
This setting controls the optional interface settings. Also see
page 6-18.
Buffer Size
* Available only when the LocalTalk/Serial module is installed and the
SelecType Emulation menu is set to L/T (LocalTalk). See Chapter 4,
" Options," for more information.
**Available only when the Type B interface is installed.
6-6
SelecType