When To Use Selectype; Selectype - Epson EPL-N1200 Reference Manual

When to Use SelecType

In general, use SelecType only for settings you cannot make in
your software, including the following:
Y
Changing the emulation modes and selecting the IES
(Intelligent Emulation Switching) mode
Y
Specifying the channel and configuring the interface
Y
Choosing the size of the memory buffer used to receive data
You should keep in mind the following points when using
SelecType settings.
Y
A number of SelecType settings can also be made using the
OneTouch modes, printer driver, and Remote Control
Panel utility.
Y
Application programs may send commands to the printer
that override SelecType settings. If you are not getting the
results you expect, check your application software settings.
Y
To see the current SelecType settings, print a status sheet.
Y
A map of all available SelecType menus is included in
Appendix E.
6-2

SelecType