Epson EPL-N1200 Reference Manual page 105

Page Protect
Use this list to make use of the Page Protect function. This
allows you to allocate additional printer memory for printing
data, as opposed to receiving it. You may need to use Page
Protect if you are printing a highly complex page. If a Print
Overrun error occurs, change the setting to ON and reprint
your data. This reduces the amount of memory reserved for
receiving data so your computer may take longer to send the
print job, but it will allow you to print complex jobs. Page
Protect usually works best if set to Auto. You will need to
increase your printer's memory if memory errors continue to
occur.
Note:
Changing the Page Protect setting reconfigures the printer's memory
which causes any downloaded fonts to be erased.
Resolution
Selects the resolution you want to use for printing. The
available settings are 600 dpi (default) and 300 dpi.
RITech
Allows you to adjust the RITech (Resolution Improvement
Technology) setting or turn it off. See "Optimizing Print
Quality" on page 7-27 for more information about RITech.
Ordinarily, the RITech setting should not have to be changed.
The RITech options are Light, Medium, Dark, and Off.
Density
Adjusts the print density to make the printout darker or
lighter. Click the appropriate arrow key to darken or lighten
the output.
5-12
Remote Control Panel Utility