Basic Selectype Setting Procedure - Epson Stylus Pro 4000 Reference Manual

"MAINTEN
ANCE" on
page 32
"HEAD
ALIGNME
NT" on
page 33

Basic SelecType setting procedure

This section describes how to enter the SelecType mode and how
to make settings with the buttons on the control panel.
Note:
❏ Press the Pause
mode and return to the READY status.
❏ Press the Paper Source
1. Enter the SelecType mode
Make sure that READY is displayed on the LCD, and press the
Menu
2. Select a menu
Press the Paper Feed
desired menu.
3. Set the menu
Press the Menu
item is displayed on the LCD.
4. Select an item
Press the Paper Feed
desired item.
"CUTTER REPL" on page 32
"CHNG INK SET" on page 32
"PWR CLEANING" on page 32
"CLOCK SETTING" on page 32
"PAPER THKNS" on page 33
"ALIGNMENT" on page 33
button whenever you want to exit the SelecType
button. The first menu is displayed on the LCD.
button to set the selected menu. The first
EXEC
EXEC
EXEC
YY/MM/DD HH:MM
MM/DD/YY HH:MM
STD, 0.1 mm - 1.6 mm
AUTO, MANUAL
button to return to the previous step.
or Paper Feed
or Paper Feed
The Control Panel
button to select a
button to select a
1
1
1
1
1
1
1
1
1
1
1
1
21