Printout Has Smears On The Bottom Edge; Print Quality Could Be Better; Horizontal Banding - Epson Stylus Pro 4000 Reference Manual

Printout has smears on the bottom edge

Try one or more of these solutions:
❏ If the paper is curled towards the printable side, flatten it or
curl it slightly to the opposite side.
❏ For Windows, if you use Epson special media, check the
Media Type setting in the Main menu. See "Making Settings
on the Main Menu" on page 53.
Mac OS 8.6 to 9.x, if you use Epson special media, check the
Media Type setting in the Print dialog box. See "Making
Settings in the Print Dialog Box" on page 139.
For Mac OS X, if you use Epson special media, check the
Media Type setting in the Print Settings selected in the Print
dialog box. See "Page Setup" on page 207.
For paper other than Epson's, register and select paper thickness
in the SelecType mode. Make sure it is correct for the paper you
are using. See "Making the paper settings" on page 37.
❏ Set the PLATEN GAP to WIDE in the PRINTER SETTING of the
SelecType mode. See "PRINTER SETUP" on page 22.

Print Quality Could be Better

Horizontal banding

Try one or more of these solutions:
❏ For Windows, check the Media Type setting in the Main
menu. Make sure it is correct for the paper you are using. See
"Making Settings on the Main Menu" on page 53.
Troubleshooting
7
7
7
7
7
7
7
7
7
7
7
7
307