Epson Stylus Pro 4000 Reference Manual page 292

RELOAD PAPER
INSERT DEEPLY
NOT STRAIGHT
RELOAD
PAPER NOT
STRAIGHT
PAPER NOT CUT
COMMAND
ERROR
LOAD ROLL PAPER
292
Troubleshooting
Cut sheet media
inserted from the front
manual feed slot is not
inserted deep enough.
Cut sheet media is not
loaded straight, and
needs to be aligned.
The paper is not loaded
straight.
Paper is not cut correctly
when Roll Auto Cut On
is selected.
Damaged data is sent to
the printer.
The printer receives data
with a wrong command.
The installed printer
driver is not correct for
the printer.
The roll paper is not set
correctly.
Insert the paper
deeper. See "Loading
into the front manual
feed slot" on page 257.
Load the cut sheet
media correctly. See
"Loading cut sheet
media" on page 248.
Load paper straight.
Open the top cover
and remove the uncut
paper. If RELOAD
PAPER is displayed on
the LCD, reload paper.
The paper cutter may
not be installed
correctly. See
"Replacing the Paper
Cutter" on page 279.
Paper cutter may be
blunt. Replace the
paper cutter. See
"Replacing the Paper
Cutter" on page 279.
Stop printing, and press
the Pause button for 3
seconds.
Stop printing, and press
the Pause button for 3
seconds. Then make
sure that the installed
printer driver is correct
for the printer.
Load the roll paper
correctly, and select
Roll Auto Cut On
Roll Auto Cut Off
See "Loading the roll
paper" on page 240.
or
.