Updating The Printer Driver Information - Epson Stylus Pro 4000 Reference Manual

20. After confirming the LOWER BOTH INK LEVERS is displayed on
the LCD, lower the ink levers on the right and left.
21. The printer starts charging ink. After approximately 2
minutes, ink lever messages appear on the LCD. When a
message appears on the LCD, raise or lower the ink levers
accordingly until READY appears on the LCD.
Note:
Because the ink charging after changing the ink set consumes a large
quantity of ink, you may need to replace the ink cartridges soon.
22. When READY appears on the LCD, the ink charging is
completed. Close the ink compartment covers.
Note:
If you have installed 220 ml ink cartridges, do not close the ink
compartment covers.

Updating the printer driver information

After the replacement operation, update the driver information.
To update the driver information, follow these steps.
Maintenance and Transportation
6
6
6
6
6
6
6
6
6
6
6
6
275