Epson Stylus Pro 4000 Reference Manual page 294

SET INK CRTG
NO INK CRTG
MNT TNK FULL
LOWER INK LEVERS
LOWER L INK LVR
LOWER R INK LVR
TOP COVER OPEN
LOAD PAPER
SET PAPER LEVER
294
Troubleshooting
CSIC error has occurred.
Ink cartridge is not
installed, or ink lever is
raised to the released
position.
The maintenance tank is
full.
Both ink levers have
been raised.
The ink lever on the left
ink compartment has
been raised.
The ink lever on the right
ink compartment has
been raised.
Top cover is open.
The paper lever is in the
released position.
Paper lever is in the
released position.
Remove the ink
cartridge and reinstall
it. If this message is
displayed after
reinstalling the ink
cartridge, replace it.
See "Replacing Ink
Cartridges" on page
264.
Install ink cartridge, or
lower the ink lever to
the secured position.
Replace the
maintenance tank with
new one. See
"Replacing the
Maintenance Tank" on
page 277.
Lower the ink levers.
Lower the ink lever on
the left ink
compartment.
Lower the ink lever on
the right ink
compartment.
Close the top cover.
Move the paper lever
to the secured position.
Move the paper lever
to the secured position.