NordicTrack Pro 3000 Treadmill User Manual page 12

9. Raise the Frame (61) to the position shown.
Have a second person hold the Frame until
this step is completed.
Align the upper end of the Storage Latch (65)
with the holes in the bracket on the Frame (61).
Attach the Storage Latch with the 3/8" x
2" Bolt (5) and the 3/8" Nut (8). Firmly tighten
the 3/8" Nut.
Lower the Frame (61) as described on page 31.
10. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 33).
9
61
8
12
5
65