Using Pi Seek; Using Auto Pi Seek For Preset Stations; Limiting Stations To Regional Programming - Pioneer DVH-P7000R Operation Manual

Section
RDS
04

Using PI Seek

If this product fails to find a suitable alternative
frequency, or if you are listening to a broadcast
and the reception becomes weak, this product
will automatically search for a different station
with the same programming. During the search,
is displayed and the output is muted.
PI Seek
The muting is discontinued after completion of
the PI seek, whether or not a different station is
found.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as
when travelling long distances, this product can
be set to perform PI Seek during preset recall.
• The default setting for Auto PI Seek is off. See
Switching Auto PI Seek on page 80.
Limiting stations to regional program-
ming
When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.
1 Press to select
F
Press until
F Regional
• Pressing
FUNCTION
performs the same operation.
24 En
REG.
appears in the display.
on the head unit also
2 Press E to turn the regional function on.
is displayed.
Regional :ON
• Pressing 5 on the head unit also performs
the same operation.
3 Press e to turn the regional function off.
is displayed.
Regional :OFF
• Pressing ∞ on the head unit also performs the
same operation.
Notes
• Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
• The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
• can be turned on or off independently for
REG
each FM band.