Pioneer DVH-P7000R Operation Manual page 52

Section
Multi-CD Player
08
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 53.
1
DISC NUMBER
Shows the disc currently playing.
2
TRACK NUMBER
Shows the track currently playing.
3
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
SOURCE
player.
Press until you see
SOURCE
• Pressing
SOURCE
forms the same operation.
2 Use
VOLUME
Press to increase or decrease the vol-
VOLUME
ume.
• Rotating
VOLUME
increases or decreases the volume.
52 En
1 2
3
indicator
indicator
to select the multi-CD
displayed.
Multi-CD
on the head unit also per-
to adjust the sound level.
on the head unit also
3 Select a disc you want to listen to with the
buttons .
NUMBER (1-6)
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as for disc 7, until the disc number
1
appears in the display.
• Pressing buttons on the head unit also
1-6
performs the same operation.
• You can also sequentially select a disc by
pressing E/e (5/∞ on the head unit).
4 To perform fast forward or reverse, press
and hold 1 or ¡.
• Pressing and holding 2 or 3 on the head unit
also performs the same operation.
5 To skip back or forward to another track,
press 1 or ¡.
Pressing ¡ skips to the start of the next track.
Pressing 1 once skips to the start of the cur-
rent track. Pressing again will skip to the previ-
ous track.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.