Receiving Traffic Announcements; Responding To The Tp Alarm - Pioneer DVH-P7000R Operation Manual

RDS

Receiving traffic announcements

TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a or enhanced other network's
TP
station.
TP
When you are tuned into a TP or enhanced other
network's TP station the
will light.
2 Press on the head unit to turn traffic
TA
announcement standby on.
Press until appears in the display. The
TA TA ON
tuner will standby for traffic announcements.
• To turn traffic announcement standby off,
press on the head unit again.
TA
3 Use to adjust the
VOLUME
a traffic announcement begins.
Press to adjust the TA volume.
VOLUME
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
• Rotating on the head unit also
VOLUME
adjusts the TA volume.
indicator ( )
TP
volume when
TA
4 Press on the head unit while a traffic
TA
announcement is being received to cancel the
announcement.
The tuner returns to the original source but
remains in the standby mode until
head unit is pressed again.
Notes
• You can also turn
TA
menu that appears by pressing
on the head unit).
• The system switches back to the original
source following traffic announcement recep-
tion.
• Only TP and enhanced other network's TP
stations are tuned in during seek tuning or
BSM when TA is on.

Responding to the TP alarm

When a TP or enhanced other network's TP
station is lost due to a weak signal a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network's TP station.
When listening to the tuner, tune in another
or enhanced other network's
TP
• When listening to sources other than the
tuner, this product will automatically seek out a
TP station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.
on the
TA
on or off in the setting
(
F FUNCTION
station
TP .
En
Section
04
25