Audio Adjustments Introduction Of Audio Adjustments - Pioneer DVH-P7000R Operation Manual

Audio Adjustments
Introduction of audio
adjustments
1
display
AUDIO
Shows the audio adjustments status.
2 Subwoofer indicator
Shows when the subwoofer is on.
Press to display the audio function names.
A
Press repeatedly to switch between the follow-
A
ing audio functions:
(balance adjustment)—
Fad
adjustment)— (bass)—
Bass
(loudness)—
Loud Sub-W1
(non fading output on/off)—
(subwoofer2)/ (non fading output set-
Non Fad
ting)— (high pass filter)—
HPF
adjustment)
• When the subwoofer controller setting is only
, you cannot switch the
S.W Control:EXT
(Refer to page 82.)
• You can select the
Sub-W2
Subwoofer output is switched on in the
• When the subwoofer controller setting is only
, you can switch the non fading
S.W Control:EXT
output on/off mode. (Refer to page 82.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• Pressing on the head unit also per-
AUDIO
forms the same operation.
• When selecting the FM tuner as the source,
you cannot switch to
SLA
• To return to the playback display, press
.
BAND/ESC
1 2
(equalizer curve
EQ
(treble)—
Treble
(subwoofer1)/
Non Fad
Sub-W2
(source level
SLA
Sub-W1
only when
.
Sub-W1
.
Important
• If the Multi-channel processor (DEQ-P7000) is
connected to this unit, the audio function will
be changed into the Multi-channel proces-
sor's audio menu. For details, see the Multi-
channel processor (DEQ-P7000) owner's
manual.
Notes
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
• Audio menu functions change depending on
the rear output setting in the initial setting
menu. Refer to Setting the rear output and
subwoofer controller on page 82.
.
Section
09
En 61