Table of Contents
Advertisement
Available languages
Available languages
Operating this unit
5
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL to store in this
unit.
# Pushing MULTI-CONTROL right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the
beginning, PIN code cannot be stored in mem-
ory.
Editing device name
You can edit the device name.
The device name is set to Pioneer BT unit as
default.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Edit device name.
3
Press DISPLAY to select the desired
character type.
Press DISPLAY repeatedly to switch between
the following character types:
Alphabet (upper case)—Alphabet (lower case)
—Numbers and symbols
4
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
5
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
6
After inputting device name, press
MULTI-CONTROL to store in this unit.
# Pushing MULTI-CONTROL right in the confir-
mation display returns you to the device name
input display, and you can change the device
name.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the
beginning, device name cannot be stored in
memory.
Displaying system version for
repair
Should this unit fails to operate properly and
you consult your dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
BT Version Info.
The system (microprocessor) version of this
unit is displayed.
3
Push MULTI-CONTROL left to switch to
the version of the Bluetooth module of this
unit.
# Pushing MULTI-CONTROL right returns to the
system version of this unit.
Resetting the Bluetooth
wireless technology module
Bluetooth telephone and Bluetooth Audio
data can be deleted. To protect personal infor-
mation, we recommend deleting this data be-
fore transferring the unit to other persons. The
following settings will be deleted.
! phone book entries on the Bluetooth tele-
phone
! preset numbers on the Bluetooth tele-
phone
! registration assignment of Bluetooth tele-
phone
! call history of Bluetooth telephone
! history of the most recently connected
Bluetooth audio
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
Section
02
53
En
Advertisement
Chapters
Table of Contents
