Table of Contents
Advertisement
Using Bluetooth wireless technology
# While using Bluetooth audio player in A2DP , it
is not possible to connect the Bluetooth tele-
phone automatically.
# To turn automatic connection off, press
MULTI-CONTROL again.
Displaying system version for
repair
Should this unit fails to operate properly and
you consult your dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
1
Display the connection menu.
Refer to Introduction to connection operations
on page 30.
2
Use MULTI-CONTROL to select
BT Version INFO.
The system (microprocessor) version of this
unit is displayed.
3
Push MULTI-CONTROL left to switch to
the version of the Bluetooth module of this
unit.
# Pushing MULTI-CONTROL right returns to the
system version of this unit.
Displaying BD (Bluetooth
Device) address
This unit displays the BD address of this unit.
1
Display the connection menu.
Refer to Introduction to connection operations
on page 30.
2
Use MULTI-CONTROL to select
Device INFO in the function menu.
3
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Editing device name
You can edit the device name.
The device name is set to DEH-P8100BT as de-
fault.
1
Display the connection menu.
Refer to Introduction to connection operations
on page 30.
2
Use MULTI-CONTROL to select
Edit device name.
3
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
# Device name can be up to 32 characters long.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
5
After editing device name, press
MULTI-CONTROL to store in this unit.
Entering PIN code for Bluetooth
wireless connection
To connect your Bluetooth device to this unit
via Bluetooth wireless technology, you need to
enter PIN code on your Bluetooth device to
verify the connection. The default code is
0000, but you can change this in this function.
! With some Bluetooth devices, you don't
need to enter the PIN code.
1
Display the connection menu.
Refer to Introduction to connection operations
on page 30.
2
Use MULTI-CONTROL to select
Pin code input.
3
Push MULTI-CONTROL up or down to
select a number.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
5
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL to store in this
unit.
# Pushing MULTI-CONTROL right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the
beginning, PIN code cannot be stored in mem-
ory.
Section
08
33
En
Hide quick links:
Advertisement
Table of Contents
