Table of Contents
Advertisement
Available languages
Available languages
Section
02
Operating this unit
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Warning tone.
3
Press MULTI-CONTROL to turn warning
tone on.
# To turn warning tone off, press
MULTI-CONTROL again.
Switching the face auto open
To protect against theft, this unit features de-
tachable front panel. To detach the front panel
easily, the front panel opens automatically.
This function is on as a default.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Face auto open.
3
Press MULTI-CONTROL to turn the face
auto open on.
# To turn the face auto open off, press
MULTI-CONTROL again.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 54.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select AUX1/
AUX2.
50
En
3
Press MULTI-CONTROL to turn AUX1/
AUX2 on.
# To turn AUX off, press MULTI-CONTROL
again.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can turn the dimmer on or off.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select Dimmer.
3
Press MULTI-CONTROL to turn dimmer
on.
# To turn dimmer off, press MULTI-CONTROL
again.
Adjusting the brightness
You can adjust the display brightness. Initially
this mode is set to 12.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Brightness.
3
Push MULTI-CONTROL left or right to
adjust the brightness level.
0 to 15 is displayed as the level is increased or
decreased.
# When dimmer is functioning, the brightness
level can be adjusted 0 to 10.
Advertisement
Chapters
Table of Contents
