Setting Up For Hands-Free Phoning; Introduction To Connection And Pairing - Pioneer DEH-P800BT Operation Manual

Operating this unit
Shows AUTO when the automatic answering
function is on (for more details, refer to Setting
automatic answering on page 41).
7 Clock display
Shows the time (if connected with a phone).
8 Calendar display
Shows the day, month and year (if connected
with a phone).

Setting up for hands-free phoning

Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, pairing your phone with
this unit, and adjusting the volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting and disconnecting
a cellular phone on the next page.
2 Pairing
Pairing is usually performed automatically
during the connection operation. You only
need to perform this operation manually when
your phone is connected temporarily for any
reason.
We recommend you pair the phone to this unit
to make best use of the technology.
To pair your temporarily connected phone,
refer to Pairing a connected cellular phone on
page 34.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller's voice volume and ring volume may
vary depending on the type of cellular phone.
# If the difference between the ring volume and
caller's voice volume is big, overall volume level
may become unstable.
# Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Notes
! The equalizer curve for the phone source is
fixed.
! When selecting the phone source, you can
only operate Fader (balance adjustment) in
the audio menu.
! When selecting the phone source, the fader
value is set to F 15 as an initial setting.
Introduction to connection and
pairing
1 Press MULTI-CONTROL to display the
main menu.
CONNECTION, FUNCTION, AUDIO,
ENTERTAINMENT and RECEIVING MOVIE ap-
pear on the display.
2 Use MULTI-CONTROL to select
CONNECTION.
The connection menu is displayed.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
Paired phone (paired phone)—
BT Hands Free (new phone)—Set phone
(phone registration)—Disconnect phone (dis-
connect phone)—Delete phone (delete
phone)
If the phone is not connected and not
paired
The following function can be operated.
! BT Hands Free (new phone)
If the phone is not connected but paired
The following functions can be operated.
! Paired phone (pair phone manually)
! BT Hands Free (new phone)
! Delete phone (delete phone)
If the phone is connected but not paired
Section
02
31
En