Table of Contents
Advertisement
Available languages
Available languages
Section
02
Operating this unit
! You can also turn on or off feature demo by
pressing DISPLAY while this unit is turned off.
For more details, see Feature demo mode on
page 9.
Switching the reverse mode
If you do not perform an operation for about
30 seconds, screen indications start to reverse,
and continue reversing every 10 seconds.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Reverse mode.
3
Press MULTI-CONTROL to turn the re-
verse mode on.
# To turn the reverse mode off, press
MULTI-CONTROL again.
Note
You can also turn on or off reverse mode by press-
ing BAND while this unit is turned off. For more
details, see Reverse mode on page 9.
Switching the ever scroll
When Ever Scroll is set to ON, text information
recorded on CD or iPod scrolls continuously in
the display. Set to OFF if you prefer the infor-
mation to scroll just once.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Ever-scroll.
3
Press MULTI-CONTROL to turn the ever
scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.
52
En
Activating the BT Audio source
You need to activate the BT Audio source in
order to use a Bluetooth audio player.
This setting is set to on by default. If you do
not use BT Audio, you can turn it off.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
BT AUDIO.
3
Press MULTI-CONTROL to turn the
BT Audio source on.
# To turn the BT Audio source off, press
MULTI-CONTROL again.
# If you turn the BT AUDIO in the initial settings
off, the history of the most recently connected
Bluetooth audio stored in this unit is cleared.
Entering PIN code for Bluetooth
wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
Pin code input.
3
Push MULTI-CONTROL up or down to
select a number.
# You can also press 0 to 9 on the remote con-
trol to select a number.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
Advertisement
Chapters
Table of Contents
