11
SERVICE WORK ON THE CHASSIS
11.1
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.3
Bleeding fork legs
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (59229055000)
The tires should no longer be in contact with the ground.
–
Secure the motorcycle against falling over.
601945-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
the left side of the vehicle.
Info
Remove the plug-in stand before riding.
602658-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten bleeder screws.
C00007-10
Finishing work
–
Remove the motorcycle from the lift stand. (
into the plug-in stand bracket on
1
p. 27)
briefly.
1
p. 27)
27