KTM 65 SX Owner's Manual page 49

11 SERVICE WORK ON THE CHASSIS
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
602689-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder, remove the bleeder screw and mount bleeding syringe
300670-10
–
Inject the liquid into the system until it escapes from drill hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container
–
Position the cover with the diaphragm. Mount and tighten the screws.
602690-10
.
1
with diaphragm .
2 3
with the appropriate hydraulic fluid.
4
p. 82)
of the master
5
4 mm (0.16 in)
47
.
4