Table of Contents
Advertisement
Set Up Network Connection
To use the machine by connecting to the network, you must set up the IP address.
An IP (Internet Protocol) address is an identification number assigned to each individual computer connected to
the Internet.
To use the following functions, you must set up the IP address in advance.
Remote UI:
Access and change the machine settings from a web browser on the computer by using the Remote UI software.
E-Mail:
Send scanned documents attached to e-mail message through a network.
Scan to File Server: Send a scanned document to a file server from the computer.
I-Fax:
Send a document to a machine that is compatible with I-fax.
PC Print:
Print documents on a computer.
PC Fax:
Fax a document on a computer.
The flow chart below indicates the settings needed for each function.
Specify the IP Address Settings
An IP address must be specified in order to enable communication between the machine and computer.
–
It is recommended that the network administrator perform the following procedures.
–
Before performing the following procedure, make sure that the machine is turned ON and connected to a network.
4 Set Up Network Connection
21
Advertisement
Table of Contents
