Set Up Network Connection; Connect The Lan Cable; Compatible Lan Cables - Oce image runner 1025 Quick Start Manual

4

Set Up Network Connection

This section describes the network connection.
If you are using the imageRUNNER 1025 without optional network board installed, skip the procedure described in this section.

Connect the LAN Cable

1
Connect a LAN cable that is compatible with the LAN connector of this machine.

Compatible LAN Cables

A category 5 or greater twisted pair LAN cable is compatible with the machine. Connect one end to the
10Base-T/100Base-TX port on the back of the machine and the other end to a network router or a hub.
–
The machine does not come with a LAN cable.
–
You can use the imageRUNNER 1025 in a network environment if the optional network board is installed.
–
If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. (See "USB Connection, " on
p. 31.)
20